1 / 7
Stand for SpotMicroESP32
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for SpotMicroESP32. Required Printed Parts: Stand.stl (2x) StandConnector.stl (2x) StandFoot.stl (4x) Required…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 54
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Stand for SpotMicroESP32.
Required Printed Parts:
- Stand.stl (2x)
- StandConnector.stl (2x)
- StandFoot.stl (4x)
Required OtherParts:
- M3 nuts (8x)
- M3 screw length 12 mm (8x)
Recommended Materials:
- PLA (30%): Stand.stl, StandConnector.stl
- Ninjaflex (10%): StandFoot.stl
- Ninjaflex (10%): StandAntiSlip.stl
Changes 5 Jan 2021:
- added optional StandAntiSlip.stl to avoid that robot slides in stand while testing
- added optional Stand_TopHalf.stl and Stand_BottomHalf.stl which should be glued together. These parts can be used if the stand.stl does not fit the printbed
Category: Robotics