Ford Falcon CarPlay Bracket: Single-DIN Head Unit Tissue Box Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the FG / FG-X Falcon tissue box and holds any single-DIN CarPlay head unit. Just pop out the tray and replace!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
A CARPLAY SCREEN IN YOUR FG FALCON, IN ABOUT 10 MINUTES
This bracket replaces the tissue box under your factory stereo and holds any single-DIN head unit (the standard 18 × 5 cm size). Pull the tissue box out, move its two clips onto the bracket, press the head unit in and clip it into the dash.
Your factory stereo stays. Sound goes from the head unit's RCA outs into the Falcon's AUX and plays through your own speakers. Nothing gets cut or spliced, and it all comes back out if you want the tissue box back.
Full install guide, parts list and wiring: https://github.com/kalteclabs/fg-falcon-carplay-unit
FITMENT
• FG (MkI and MkII) and FG-X, sedan and ute
• Not FPV models (the push-start button sits in the tray)
WHAT ELSE YOU NEED
• A single-DIN head unit (about $50)
• An RCA to 3.5 mm audio cable
• Power: a cigarette plug lead, or two fuse taps in the fuse box
Total parts cost is about A$65–75. Every part, link and price is in the parts list on GitHub.
PRINT SETTINGS (Bambu Lab H2S, 0.4 mm nozzle, PETG)
• Supports: off
• Layer height: 0.2 mm
• Walls: 4
• Top / bottom layers: 5 / 5
• Infill: 40% gyroid
• Nozzle: 245 °C (240 °C if it strings)
• Fan: 40% min, 80% max, slow down for layer cooling on
• Print time: about 3 hours · Filament: 89 g
Print at 100% scale. Scaling changes the fit for the head unit and the clips. The 3MF has these settings already set for Bambu Lab printers.
FILAMENT
Print in PETG or ASA. Don't use PLA: it softens in a hot car and the bracket sags.
DON'T HAVE A 3D PRINTER?
KALTEC brackets and full kits are coming soon, with the clips fitted and everything ready to plug in. To preorder, email [email protected].
LICENCE
Designed by KALTEC. Free to build, change, share and sell. If you share a changed version, credit KALTEC with a link to the repo and release it under the same licence.
If you print one, post a make. It helps other Falcon owners find this.