Basic Duet Wifi Mounting Plate V-slot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed the design to reduce the amount of plastic required. It's just a basic temporary mount for the Duet Wifi…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I remixed the design to reduce the amount of plastic required. It's just a basic temporary mount for the Duet Wifi electronics board. Provides ample space behind the board for airflow, and if mounted with the board vertically, should not require a fan.
Print Settings
Printer:
Wilson TS
Rafts:
No
Supports:
No
Resolution:
0.3 layers, 0.5 nozzle
Infill:
20% Cubic
Notes:
3 shells, cubic infill
Screw holes for the board will likely need to be tapped with an M3 tap or drilled out with a 3/32 bit to accept an M3 8mm bolt. Test first.
The M5 holes for mounting to the extrusion will likely need to be drilled out as well. 13/64th bit should do it. M5 8mm bolts worked for me to mount to the V slot 2020.
Category: 3D Printer Parts