1 / 3
Split Flap Desk Display: One Hand Cranked Digit — image 1
1 / 3

Split Flap Desk Display: One Hand Cranked Digit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A hand cranked split flap desk display: one complete digit with 40 flaps, a ratchet click and no glue or supports.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
6
Reviews
0

Updated at source:

Model information

Category
Office
License
Standard Digital File License

> **NOT TEST PRINTED.** I have not printed this one yet. It passes my software checks (watertight, one body per file, flat on the bed, no supports, the flap pins clear their holes, the stop tabs release the top flap after one click, the pawl clicks once per flap) and every picture is a render, not a photo.

**Full version (with five digits, the dovetail joiners and the five digit colour guide) on Cults:** https://cults3d.com/en/3d-model/gadget/split-flap-desk-display-hand-cranked-5-digits-no-electronics

A desk model of one split flap digit, like a single character from an old departure board. Turn the crank, the ratchet clicks, the top flap drops and the next character shows. It is a complete working digit on its own: 40 flaps with a blank, A to Z, 0 to 9, a slash, a full stop and a question mark.

The flaps hang on two pins in a pair of flanges on a hexagon axle. A spring pawl cut into the right wall rides a 40 tooth ratchet, so each click is one flap. Two stop tabs hold the top flap until its hinge drops past them. My DXM roundel is embossed on the top plate.

It has no electronics and no motor, and it goes together with slide fits, tongues in slots and a tapered pin, with no glue in the design.

**What you get**

* 11 STL files, each already in their print orientation: base, two walls, top plate, two flanges, axle, crank, pin and two flap trees

* A coloured 3MF of the assembled digit as a colour guide

* README with print settings and assembly steps, the build scripts and the check results

**What you need**

* About 145 g of filament and around 9 hours of printing (my estimates, not slicer output)

* Any bed of 120 x 120 mm or larger

* No supports. The flaps print standing on their hinge edge, so use a brim on the flap trees.

* A white paint pen or fine marker for the raised letters (the renders show them painted)

**Licence:** Standard Digital File License

There are more models and a few small games at dexmlabs.app.

If you print one, I’d love to see it. Post a make with a photo, good or bad, and it helps me improve the next version. Happy to tweak the design on request.

Tags