1 / 4
GyroShift - Shape-Shifting Snowflake Spinner — image 1
1 / 4

GyroShift - Shape-Shifting Snowflake Spinner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print-in-place snowflake fidget spinner: flick it to spin, push an edge to fold all six branches into a twisted shape.

Rating
0 / 5
Likes
6
Downloads
36
Makes
0
Views
113
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

I wanted a spinner that is just as much fun when it stops spinning. Hold GyroShift Snowflake by the center and give it a flick to spin it freely. Then press one of the outer branches inward and watch the whole snowflake fold into a tighter, twisted shape. Watching all six branches move together is my favorite part.

The snowflake prints in place as one piece, with no supports. A small post and cap print next to it: push the post through the center hole and press the cap on to make the spinning hub.

Before the first spin: Once the print has cooled, gently grip opposite outer edges and pull them slightly apart to release the tension and free up the moving parts. Then push an outer edge inward to try the shape shift.

Print settings

  • PLA, 0.4 mm nozzle

  • 0.2 mm layer height

  • 4 walls, 40% infill

  • No supports

  • Snowflake, post and cap on one plate

If you print one, I would love to see what color you choose! ❄

Tags