1 / 1
Hoberman Sphere — image 1

Hoberman Sphere

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The most diabolical thing you could make is this giant expanding ball.

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

Category
Math
License
Creative Commons — Attribution — Share Alike

HOBERMAN SPHERE

This is a very compact and largely expanding sphere that incorporates a Hoberman mechanism. This sphere should be around 150mm closed and 450-500mm expanded. Please print as the original designed size because the holes need to be pretty precise.

ASSEMBLY: 

I really tried my best, but unfortunately, I cannot make the sphere in the OnShape assembly, so you'll have to use some creativity.

This is a MASSIVE model and I would probably get some filament for this. 

You need 240 JOINT pieces and 60 HUBS.

You also need ~ 1920mm of filament. I mean it in distance because this was made so you could use filament as axles to combine the project together. If you have any bad filaments, now is the time to waste it here.

To begin assembling, you have to know that this is in the shape of an icosidodecahedron. There are 12 regular pentagons and 20 triangles.

The joints come together to make 6 decagon rings.

For the sake of spelling, "icosidodecahedron" will become "icd/ICD"

In the image above, there is a group of 4 joints to form one edge module. You may use filament and solder the ends to make a mushroom like end. It would be like a brass button pin. A ICD has 60 edges, so you make 60 edge modules with 4 joints each and use up 240 joints. You will be sad and you will do all of this by hand. 

You may notice I added HUBS. The hubs go in the inside ring and outside ring. 

Notice how the gray pieces make a ring. You can see there are hubs on the outside and inside. Note how the hub splits off in 4 directions. That is where 2 rings intersect. You can start off with putting 5 rings to make the pentagon, then wrapping it all up with a last ring. Have fun assembling.

Tags