SofaBaton U3 AirTag Sleeve
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A one-piece, slide-on AirTag holder for the SofaBaton U3. The remote holds the AirTag in place. No lid, screws or glue n
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
I made this to keep an AirTag on my SofaBaton U3 without getting in the way of the screen. The AirTag sits in a recess on the inside. Slide the sleeve over the screen end and the back of the remote holds the tag in place.
Print and fit
The back tapers around the AirTag, and the front lips and slide-on edges are bevelled. The display and IR end stay open. I printed and fit-tested this version on my U3.
- Print the 12 mm fit test first to check the slide-on fit on your U3.
- Print the full sleeve at 100% scale. In the supplied orientation it stands on one short end. Check the slicer preview for overhangs in the AirTag pocket and add supports there if needed. Clear the pocket and rails before fitting.
- With the sleeve opening facing up, drop in a bare AirTag and slide the sleeve onto the screen end of the remote. Slide the sleeve off to get to the AirTag.
- If you use a charging dock, check that the remote still seats and charges with the sleeve fitted.
AI WAS USED TO HELP REFINE THE DESIGN AND REMOVE BACKGROUNDS FROM SOME PHOTOS. ALL PRINTS SHOWN IN THE PHOTOS WERE PHYSICALLY PRINTED AND TESTED IN REAL-WORLD USE. CAD RENDERS ARE LABELLED SEPARATELY.