IKEA DRAGAN

A simple 3D printed upgrade for the IKEA DRAGAN bamboo toothbrush holder.

When wall-mounted, the original plastic bottom of the IKEA DRAGAN toothbrush holder can become loose or detach under the weight of toothbrushes and other bathroom accessories.

This custom-designed insert solves that problem by transferring the weight directly to the upper bamboo frame instead of relying on the original plastic bottom.

Features

• Hanging design: A 1.5 mm overhanging rim rests on the upper bamboo frame.

• Ventilated mesh: Open-grid walls promote airflow and reduce trapped moisture between the insert and the bamboo.

• Drainage: Open mesh bottom allows water to escape.

• Lightweight construction: Thin mesh structure reduces material consumption.

• Tight fit: Designed specifically for a 72 × 52 mm internal opening.

• Easy to print: Designed for the Bambu Lab A1 Mini and other FDM printers.

Dimensions

• Insert body: 70.8 × 50.8 mm

• Overall height: 118 mm

• Upper rim: 75 × 55 mm

• Rim overhang beyond bamboo opening: 1.5 mm

Recommended Print Settings

• Material: PETG (recommended for humid bathroom environments)

• Nozzle: 0.4 mm

• Layer height: 0.2 mm

• Wall loops: 3

• Supports: Off

• Orientation: Print upside down, with the upper rim touching the build plate.

Installation

Simply slide the printed insert into the bamboo holder from above. The upper rim rests on the bamboo frame, supporting the weight of your toothbrushes independently of the original plastic bottom.

Important Notes

Please measure your DRAGAN holder before printing, as product dimensions may vary slightly.

This model was designed for personal use and has not been officially tested or endorsed by IKEA.

A small functional upgrade that makes the DRAGAN more practical, ventilated, and reliable!