Eufy S340 Wall Mount Set – Corner, Flat Wall, 45°
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three outdoor camera mounts designed for the Eufy S340: outside corner, straight flat wall and 45° side view.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Standard Digital File License
Summary
Choose the ~63° outside-corner mount for a view along two walls, the 90° flat-wall mount for a straight view, or the 45° side mount for a view along the wall. Measure your corner before printing. Designed for compatibility with the Eufy S340. Check all three mounting holes against the original camera base before printing. This independent design is not affiliated with Eufy or Anker.
Print Settings
3MF projects: A1 for the corner, X1 Carbon for the 90° and 45° variants. Print flat in PETG with a 0.20 mm layer height, 4 walls, 15% gyroid infill, a 70 °C bed and a brim. Use 245 °C for the nozzle, with 250 °C on the first layer in the A1 project. No supports are required. For long-term exposure to direct sunlight, consider ASA with a suitable profile.
Post-printing / Assembly
Mark and drill four holes, insert suitable wall plugs and fasten the mount with countersunk screws. Tighten gently. Attach the camera base with three self-tapping screws, fit the camera and adjust its view.
How I Designed This
The diamond truss keeps the arm light and stiff. A relief clears rounded corner edges, and all four wall screws on the flat-wall variants are accessible from the front.
Update
Added two flat-wall variants: a straight 90° mount and a 45° side mount, both with X1 Carbon PETG 3MF projects. The original 63° corner mount uses the Bambu Lab A1 profile.
Which mount did you use? Post a Make! Leave a comment with your measured angle if you need a different corner version.