Fully functional desk lamp in Steampunk style

Assembling guide on Youtube: https://www.youtube.com/watch?v=hUhmg1zEbRY

 BILL OF MATERIALS:

- 220/110V plug - plug type depends on the country
- R13-112A switch - https://s.click.aliexpress.com/e/_AX8eMl
- 256 pcs of M4x16 screws (DIN912) - https://s.click.aliexpress.com/e/_A8p4pJ
- E27, 18.5 cm long Edison bulb LED type 5W max https://s.click.aliexpress.com/e/_AZiN5B

Aliexpress (it is one shop where you can buy all this items):

• E27 Holder for bulb, black - https://s.click.aliexpress.com/e/_9IV8MN

• Around 4m retro cable - https://s.click.aliexpress.com/e/_Ab15zF

• B style Cable clamp - https://s.click.aliexpress.com/e/_DlqF1aL

3D PRINTING SETTINGS

• all parts can be printed without support

• print each STL file once

• 3D models are in the correct position in relation to the bed, no need to rotate them

• if you want to paint you can print with 0.3mm layer height

• use 3 wall lines

• 5 bottom and top layers

• 15% infill

• nozzle - 0.4mm or 0.6mm (on all my prints I use 0.6mm)

PAINTING GUIDES:

Iron rust (Modern Masters paint): youtu.be/1xOuB0sGLH0 
Bronze patina (Modern Masters paint): youtube.com/watch?v=98WkF9aaf6c 
Iron rust (Ecorson Oxidecor Fine and Jeger activator): youtube.com/watch?v=NA6MUdbfwLg 

-

Here you’ll find all my free projects and if you’d like to check out the other (paid) ones, feel free to visit my MyMiniFactory page!

https://www.myminifactory.com/users/TomaszFortyFour