DeWalt DCBL722 Concentrator Nozzle, Bent 30°
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of siming_designs' DCBL722 concentrator nozzle with the outlet bent 30°, so the flat jet runs along the ground.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I like siming_designs' concentrator nozzle for the DeWalt DCBL722, but with the blower held at a comfortable angle the jet hits the pavement right in front of my feet. This remix bends the outlet 30°, so the flat jet runs closer to parallel with the ground and pushes leaves further.
Fits the DeWalt 20V MAX DCBL722 handheld blower. The clip collar is untouched (everything below 65 mm is the original geometry), so it clips on exactly like the original. The nozzle clips on either way round: put it on with the bend pointing up, away from the ground.
Print settings: PETG or ASA rather than PLA, since it lives outdoors and in the sun. Outlet face down on the bed (the files are already oriented this way). 0.2 mm layers, 4 walls, 10% infill, tree supports for the clip windows, brim. About 120 g.
Original: DeWalt DCBL722 Leafblower Concentrator Nozzle by siming_designs on MakerWorld, https://makerworld.com/en/models/413316 (CC BY-NC 4.0).