Deda Superbox Under Stem Semi-Integrated Cable Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Deda Superbox Under Stem Semi-Integrated Cable Guide
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Like my work and want to support me? Donate here: https://ko-fi.com/schneiderstag, or use my referral codes: https://deals-spotlight.lovable.app/ and we both get something!
If you have a Garmin watch, try out my watch face: https://apps.garmin.com/apps/a6460fc5-ac11-4032-91a5-973a5a450948
Cable guide for Deda Superbox stem for semi-integrated cable routed bikes.
I have a 3T Exploro RaceMax that has a behind stem top tube cable routing/entry, and it's the only thing I dislike on the bike, because I can't grab the bike on the stem and because the cable management looks like crap.
I had this idea to modify the Deda Superbox spacer for integrated routing, so I cut and separated the part that goes under the stem from the spacer and added a hole on each side so the cables can exit and enter the top tube. It looks better now.
Installation instructions:
Install the part on the stem leaving a gap big enought for the cables
Thread the cables in, by the sides
Screw the bolt all the way in
Done, your cables are routed under the stem!
I printed mine in PLA. You can use whatever material that floats your boat (I don't think TPU will work well for obvious reasons).
I also applied transparent helitape to the stem to protect against cable rub or even the 3D printed part.
Settings:
Wall Loops: 4 to 6 walls.
Infill Density: Min 15%.
Infill Pattern: Gyroid or Cubic.
Top/Bottom Layers: 5 to 6 layers.