1 / 5
Demon Mask - Wearable Horned Mask with Filigree Crown — image 1
1 / 5

Demon Mask - Wearable Horned Mask with Filigree Crown

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A wearable black demon mask with curved horns, a filigree crown and carved swirl details. About 168 mm wide, sized for a

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

Category
Masks
License
Creative Commons — Attribution — Noncommercial

My own original design: a wearable demon mask with small curved horns, an open filigree crown and sharp carved swirls across the face. The big ram horns from my first version are removed, so it's lighter, faster to print and easier to wear.

It's one piece and prints in one go, standing upright with organic supports from the build plate. The supports come off cleanly with pliers and a hobby knife.

I printed mine in black PLA on a Prusa CORE One. Black really makes the details look sinister.

Files included:
- Demon_Mask_No_Horns.stl - the mask, ready to slice (about 168 x 106 x 235 mm as modelled).
- Demon_Mask_168mm_020_COREONE_HF04.3mf - my PrusaSlicer project for the Prusa CORE One HF0.4 (organic supports, 6 mm brim).

Wearing it: sand any sharp support spots and the eye edges first. Add elastic or a strap through holes you drill at the sides.

PRINT SETTINGS (from my PrusaSlicer file):
Printer: Prusa CORE One (0.4 mm high-flow nozzle)
Filament: Black PLA (slicer filament profile: Generic PLA @COREONE HF0.4, 215 C nozzle, 60 C bed)
Size: about 168 x 106 x 235 mm (as modelled, 100% scale)
Layer height: 0.20 mm (0.20mm STRUCTURAL FAST custom profile)
Perimeters: 2
Infill: 12% adaptive cubic
Supports: organic, auto-generated, build plate only (overhang threshold 55 degrees)
Brim: 6 mm
Slicer estimate: 15 h 0 m, 234 g of filament (PrusaSlicer estimate, normal mode, not a measured print)

Tags