Everglow Tree — Tiered Christmas Tree with Star Topper and Gridfinity Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tiered Christmas tree on a 2x2 Gridfinity base, with a separate gold star topper. Two files, two colours, no AMS.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution
A Christmas tree that locks into your Gridfinity desk — with a star you print in gold. Free.
The Everglow Tree is a tiered desk tree on a true 2x2 Gridfinity base (84x84mm): four tapered feet lock it into any standard baseplate so it can't slide or tip like a novelty tree, and it stands flat on a bare desk too. The star is a SEPARATE file — print the tree green and the star gold and you get a two-colour tree with no AMS and no filament swaps. The star's peg drops into a socket in the tree top (0.2mm clearance — a firm press fit).
What's in the download
zilla-everglow-tree.stl — the tree: 3 foliage tiers with droop lips, 15 bauble studs, trunk, Gridfinity base, star socket
zilla-everglow-star.stl — the 5-point star topper with its peg
Measured specs
Tree 84.0 x 84.0 x 92.0mm · star 28.6 x 6.0 x 38.0mm · assembled height 117.9mm
4 Gridfinity feet (37 to 33mm taper, 42mm pitch), Z-hex maker's mark engraved inside every foot pocket
Both files watertight, single solids
Print settings
Tree: feet-down exactly as oriented, NO supports, 0.2mm layers, 3 walls, 15% infill, PLA or PETG — approx 75g, approx 4.5h
Star: rotate it so its face lies flat on the bed (the peg runs horizontally), NO supports — approx 3g, approx 20min
Print the star in gold/yellow and the tree in green for the two-colour look in the photos
Printed it? Post a Make — show me your desk grid dressed for Christmas.
More of my designs — and the commercial-license versions — on Cults3D (Zilla's domain — premium versions live there): https://cults3d.com/en/users/zilla-forge