Crystal Crown Lantern for IKEA Tealights
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A crown of 16 leaning hexagonal crystals around a socket for a standard IKEA tealight (Ø38 mm).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
Sixteen tall hexagonal crystals lean slightly outwards in a ring around the tealight, like an ice crown. Light escapes through the gaps between the crystals and through translucent filament. Generated algorithmically (signed distance fields + marching cubes), checked watertight and printable.
Made for a standard IKEA tealight (Ø38 mm), which sits in a Ø39.6 mm socket; the top is open for heat. For a real flame print in PETG or ASA and never leave it unattended – an LED tealight is the safest choice, as PLA softens near heat.
PRINT SETTINGS
Size: 96 × 96 × 88 mm, approx. 83 g of PLA
Nozzle 0.4 mm, layer 0.16–0.2 mm, 2–3 walls
Print upright on the flat base; add tree supports only where your slicer reports overhangs
Always follow your filament manufacturer's recommended temperatures first
Part of the Revo3D generative collection. Made by Revo3D, builders of large-format Revon 3D printers – revo3d.pl/en