Hu Sanniang, Ten Feet of Steel: Rooster Swordswoman Figure (120 mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hu Sanniang from Water Margin as an armored rooster with twin sabres. 120 mm with a base, made with AI image to 3D.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
Hu Sanniang, Ten Feet of Steel of Water Margin, reimagined as a white rooster swordswoman in silver armor and a red sash, with a sabre in each hand.
The STL is one closed, watertight solid, 120 mm tall including a fitted base, so it stands on its own. It is about 105 x 78 mm across with the sabres, and needs roughly 34 g of PLA by our estimate.
How it was made: the character was turned from a single image into a textured 3D model with 3DLoom's image to 3D (https://3dloom.com/image-to-3d) and exported as a print-ready STL with a base. The back was inferred by the AI, so it is simpler than the front.
Print notes: about 0.4% of the model is thinner than 1 mm. The sabre blades are the thinnest parts, so check them in your slicer and support them. Resin or a 0.2 mm nozzle will keep more of the detail.
I haven't printed this one myself yet, so photos and settings from your print are very welcome as a Make.
Part of a set of Water Margin heroes reimagined as animal warriors. The rest of the set is on my profile.
