Nano Chuck by PRIma
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chuck Version interchangeable with Nano Vise V2 Desk Clamp version
- Rating
- 4.769 / 5
- Likes
- 626
- Downloads
- 1,909
- Makes
- 37
- Views
- 9,945
- Reviews
- 26
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
3 Jaw Chuck modified for the Desk Clamp Version of my Nano Vise V2
https://www.printables.com/model/155120-nano-vise-v2-by-prima (get the desk clamp parts from this link above)
easily swap between Vise or Chuck for your work!
suitable to clamp any round shaped parts like figures with bases for tabletop gaming or any other general work like soldering/hobby.
max. clamping diameter 75mm (jaws reverse mounted)
jaws assembly instructions:
start with jaw A slide into the begin of the spiral (any of the 3 slot) and then rotate the scroll plate until the next slot where you place then jaw B ….same for last jaw C.
(simple: A/B/C ….reverse the jaws : start with C/B/A)
You may need to sand the jaw teeth for smooth operating
M8x10 Allen screw necessary to mount the Chuck onto the Ball-Joint Shaft here is a link to a M8x10 screw which you can print :
https://www.thingiverse.com/thing:5160028