NERF Stock Worker type (small bed)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of sencio_madera's original post. It has been cut to fit a smaller bed. You will need to print four…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 1
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
This is a remix of sencio_madera's original post. It has been cut to fit a smaller bed. You will need to print four long pegs and two short ones. You will also need 5x M3 lock nuts and 2 M3x25, 2 M3x40, 1 M3x35 bolts. Use superglue or epoxy on the A and B parts. You might have to trim down the notch on the inside of the connector for a good fit.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
10%
Filament: California Filament PETG Purple
Notes:
use 5 walls for strength
Category: Sport & Outdoors