1 / 11
Clay Pigeon V1 — 3D-Printed Tooling for Casting Gypsum Targets — image 1
1 / 11

Clay Pigeon V1 — 3D-Printed Tooling for Casting Gypsum Targets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D-printable molds and a rigid holder for casting gypsum clay targets with reusable silicone inserts.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
6
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

English

Clay Pigeon V1 is a 3D-printable tooling set for casting gypsum clay targets. Two printed molds make a flexible silicone core and face insert. A rigid split holder supports and aligns the inserts. The reference target measures about 108 × 26.6 mm.

Illustrated build guides and printable descriptions in English and Ukrainian are included as PDFs.

What to print

  • 00: reference target ×1, optional

  • 01–02: core casting tool and lid ×1 each

  • 03–06: face casting tool, split walls and lid ×1 each

  • 07–10: upper cup, collar halves and lower base ×1 each

  • 11: collar pin ×2

  • 12: print-in-place latch ×6

  • 13: upper latch keeper ×3

Import in millimetres. Keep the three shells of file 12 in their exported positions and test one latch first. The documented setup is PETG on an Anycubic Kobra S1 with a 0.4 mm nozzle. For part 01, start with 0.20 mm layers, 3 walls, 10% gyroid, 8 top and 4 bottom layers, and ironing off. Check the relief on 00 and 03 in the slicer preview and put the lower rim of 00 flat on the build plate.

Casting

Assemble the two silicone tools with the pour openings up. Seal seams externally with ordinary plasticine. Test your chosen silicone on a small PETG sample before casting the inserts. Fit the face insert working side up and the core working side down, then dry-fit the holder.

Mix 75 g of G-5 gypsum plaster with 45 mL of water per target. Pour into the face insert and close the holder along its guides. The excess is pushed into the overflow channels. In testing, demolding was possible after 30 minutes. Dry for at least 24 hours after demolding.

This project is a work in progress. Improvements and fixes will be published in future updates. The target has not been tested for compatibility with commercial mechanical clay target throwers.

All files are free. Optional support via monobank helps cover materials for test builds.

Українською

Clay Pigeon V1 — комплект 3D-друкованої оснастки для лиття гіпсових мішеней. У двох формах відливають гнучке ядро та лицьовий вкладиш із силікону. Розбірний жорсткий тримач суміщає й підтримує вкладиші. Діаметр майстер-моделі близько 108 мм, висота — 26,6 мм.

Ілюстровані інструкції та описи українською й англійською додано у форматі PDF.

Що друкувати

  • 00 — зразок мішені, 1 шт. за бажанням

  • 01–02 — форма ядра та кришка, по 1 шт.

  • 03–06 — лицьова форма, стінки та кришка, по 1 шт.

  • 07–10 — чашка, половини кільця та плита, по 1 шт.

  • 11 — вісь кільця, 2 шт.

  • 12 — замок, що друкується в зборі, 6 шт.

  • 13 — верхній зачіп, 3 шт.

Імпортуй STL у міліметрах. Збережи взаємне положення трьох оболонок STL 12 і спочатку перевір один замок. Задокументований друк — PETG на Anycubic Kobra S1 із соплом 0,4 мм. Для деталі 01 початковий профіль — 0,20 мм, 3 стінки, 10% Gyroid, 8 верхніх і 4 нижні шари, прасування вимкнено. Перевір рельєф 00 і 03 у слайсері. Деталь 00 поклади нижнім ободом на стіл.

Лиття

Збери форми для силікону заливними отворами догори. Загерметизуй стики ззовні звичайним пластиліном. Перед заливкою перевір вибраний силікон на невеликому зразку з PETG. Уклади лицьовий вкладиш робочою стороною догори, ядро — донизу, і збери тримач без суміші.

На одну мішень змішай 75 г гіпсу Г-5 і 45 мл води. Налий суміш у лицьовий вкладиш і зімкни форму по напрямних. Надлишок витиснеться в канали переливу. У випробуваннях мішень можна було виймати через 30 хвилин. Після виймання суши її щонайменше 24 години.

Проєкт і далі розвивається. Вдосконалення та виправлення публікуватиму в оновленнях. Сумісність мішені з промисловими механічними метальними машинами не перевірялася.

Усі файли доступні безкоштовно. Добровільні внески через Банку monobank допомагають придбати матеріали для випробувань.

Clay Pigeon V1 on Thingiverse

Tags