1 / 5
Topographic Key Tray – terraced land, concrete rim — image 1
1 / 5

Topographic Key Tray – terraced land, concrete rim

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hallway key tray drawn as a landscape: a terraced charcoal insert in a concrete-look grey rim. Two colours, no supports

Rating
0 / 5
Likes
1
Downloads
0
Makes
0
Views
6
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Standard Digital File License

A catch tray for a hallway table, drawn as a landscape: a charcoal insert with terraced lowlands and highlands in a grey border with a cast-concrete look. The tray is 249 × 212 mm; the border climbs from 20 mm at the front to 42 mm at the back, and the land climbs with it.

Four hollows, each at its own height: a 140 × 72 mm basin for a large key bunch, an 82 × 108 mm basin for smaller bunches and a car key, and two 92 × 60 mm benches for card wallets. Terraces of 0.8 mm (four layers) make all tops print in one direction, and they are ironed. The concrete air holes are modelled into the border, and the insert drops in with 0.3 mm of play per side. The border has fuzzy skin (0.1 mm / 0.5 mm) painted on its outer wall only.

Print settings

  • Bambu Lab P1S, 0.4 mm nozzle, 0.2 mm layers, Textured PEI plate

  • Slot 1 PLA Matte Ash Gray (border), slot 2 PLA Matte Charcoal (insert)

  • 2 plates, parts placed clear of the P1S's excluded corner

  • Insert ironed on top surfaces, ironing flow 20 %

  • About 397 g and 11 h 40 (border 181 g, insert 217 g including 2 h 43 of ironing)

  • Supports: none

Designed by Yannic Fréson 3D — 3D printing and custom design in Belgium: 3d.yannicfreson.be

Tags