1 / 8
CS2 / CS:GO Mirage Map (de_mirage) – Relief Wall Art with Callouts — image 1
1 / 8

CS2 / CS:GO Mirage Map (de_mirage) – Relief Wall Art with Callouts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Relief wall map of CS2 / CS:GO Mirage (de_mirage) with height levels, callouts and A4 backing sheets in EN and UA.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
8
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I made this for my son, who spends hours on Mirage and wanted it on his wall instead of only on the screen. So I took the map's real collision data, kept only the ground players can actually stand on, and turned it into a small relief you can print. Palace, Mid, Apartments, the Catwalk and both bomb sites are all there, laid out exactly as the radar shows them.

Everything that isn't playable space is cut away, leaving a thin wall around each route. The back is flat, so the piece glues straight onto a printed A4 sheet with a 1:1 outline of the map. I made that sheet in English and in Ukrainian.

📏 Size and scale

  • 167 × 143 × 8.2 mm, comfortable on a Bambu Lab A1 or any bed from about 180 mm

  • Scale 1:643 (1 mm ≈ 0.64 m in the game)

  • Flat underside

🗺 Details

  • 16 floor heights in 0.2 mm steps, so ramps, stairs and drops show up as terraces

  • Walls rise 4 mm above the floor next to them

  • 23 official callouts as raised letters: A, B, MID, PALACE, APARTMENTS, CATWALK, CONNECTOR, CT SPAWN, T SPAWN and more

📦 What you get

All STL files share the same origin and line up when loaded together.

  • de_mirage_map.stl: the map alone, no letters

  • de_mirage_map_with_labels.stl: map plus letters, the simplest one-color print

  • de_mirage_labels_only.stl: just the letters with relief, each word follows the floor height, for a second filament printed together with the map

  • de_mirage_labels_flat.stl: just the letters, laid flat on the bed (1 mm thick): print separately and glue onto the map or the backing sheet

  • de_mirage_backing_A4_en.pdf and de_mirage_backing_A4_uk.pdf: backing sheets

🖨 Suggested print settings

  • Layer height: 0.12–0.2 mm (0.12 shows the height steps best)

  • Walls: 2

  • Infill: 10–15%, gyroid

  • Supports: none

  • Orientation: flat side down, as imported

  • Colors: sand for the map, dark brown for the letters, or print the "with labels" file in a single color

  • Backing sheet: print at 100% ("Actual size") on A4, then glue the model inside the outline

Two-color tip: the letters stand 0.8 mm above the floor. Load the map and the letters as separate parts in your slicer, or switch filament on the layer where the letters begin.

ℹ Credits

This is an unofficial fan project and is not affiliated with or endorsed by Valve.

💬 Show me your prints! I'd love to see your colors and frames, and to hear which map you want me to do next. 🚀

Tags