1 / 1
Nerf Crossbolt bow arm replacement — image 1

Nerf Crossbolt bow arm replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

replaces the Nerf crossbolt bow arms with a 3d printed alternative

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
23
Reviews
0

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial

What it do?

Ever thought the nerf crossbolt was too wide? needed more power? this model is for you. It replaces the bow arms with a easily removeable printed parts that make the blaster super thin.

Materials needed

8 #4-40 3/8th Countersunk Flat heads:

4mm Elastic Cord

Pretty Vague Assembly Instructions 

Basically once you have the blaster open, start with the removal of the bow arms. it can be a little tough. i had to use snips to remove part of the clips on the bow arm then pry a small flat head to loosen the clips on the blaster (the picture makes more sense trust me)

 

Once the bow arms are removed slide the Inner and Outer Parts together and add 2 of the screws

Then repeat for the other side as well. once they are in place, remove the locks found on the main firing assembly as shown in the picture. This is optional but you might as well cause this thing has a butt ton of locks.   

 Once the locks are removed, reassemble the blaster. then get out the elastic. Tie a knot on one end of the string holders.

 Then use 2 of the screws to attach the String holder to the outer piece.

From there measure out roughly 9in of elastic. The length of the elastic determines your performance (FPS) as well as how easy it is to prime it. I got about 115 FPS on 9in of elastic.

Tie a knot on the other Elastic holder and screw it in to the other outer piece 

Congrats! you're done and have made a very fun blaster. using a file and a worker stryfe half dart adapter lets you fire short darts out of talons. 

Credit where its due. 

I originally got this neat idea from a super old LordDraconical video. He did something similar but i wanted something a bit more polished. So i designed this in about a day. 


Lemme know if you make one! i would love to see a make :)

Tags