Smart Fortwo 10mm plastic nut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple basic 10mm plastic retention nut for a ForTwo smart. While you can buy this online, it's not something that you…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 85
- Makes
- 0
- Views
- 407
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple basic 10mm plastic retention nut for a ForTwo smart. While you can buy this online, it's not something that you can just get quickly if it's "missing"- it's used in the underbelly tray retain, the splash guard underneath the same that isolates the front part of the front to the back part of the front undertray, and so on and so forth. Print in PETG, ABS, ASA, etc. because it's exposed to the elements. The posts that these attach to are self-tapping threads so you can just simply twist this on with a 10mm socket accordingly.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
PolyMaker PETG, ABS, or ASA
Notes:
Print with 100% infill and use one of the suggested filaments as PLA isn't going to survive in the conditions of this part.
Category: 3D Printing