1 / 5
Nuki Smart Lock Pro 4 – HOPPE Amsterdam Mount (V6) — image 1
1 / 5

Nuki Smart Lock Pro 4 – HOPPE Amsterdam Mount (V6)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

One-piece anti-rotation mount for Nuki Smart Lock Pro 4 and a 53 mm HOPPE Amsterdam escutcheon.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
8
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

One-piece anti-rotation mount for a Nuki Smart Lock Pro 4 on a HOPPE Amsterdam long escutcheon, approximately 53 mm wide.

Two rounded rails grip the escutcheon behind the straight section of the Nuki plate. V6 prints as a single piece and requires no additional mounting hardware. This version was successfully printed and tested on one installation. Check the fit on your own escutcheon.

Files and print settings

  • STL for slicing with your own profiles.

  • STEP for adapting the geometry.

  • PrusaSlicer 3MF for the MK3S/MK3S+ with MMU3 and a 0.4 mm nozzle. The model and supports use PLA in filament slot 2.

Print upright in the STL orientation. The tested PLA setup uses 0.15 mm layers, six perimeters, 40% gyroid infill, organic supports and an 8 mm brim. Clear the supports from the key opening and clips, then check the grip, release mechanism and free key movement by hand before powering the lock.

Remix credits

Adapted from Base for Nuki Smart Lock (Base with hole) by Jay, a remix of Nuki Smart Lock 2.0 Adapter by LOOTY. Distributed under CC BY-NC 4.0.