Tessara: Organic Lattice Building Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap-together organic modules that grow into crystal-like lattices. A meditative desk building kit.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Tessara: a meditative fidget toy that grows like a crystal
Tessara is a modular assembly system built on tetrahedral logic. Snap the modules together and watch a crystal-like lattice grow under your hands: a tactile desk object that you can extend, reshape and let rest in different forms.
How it works
Each module is an organic, irregular shape with connection points arranged on tetrahedral directions. Modules click together and connect into a tetrahedral lattice. The smallest cell of that lattice is a cluster of eight modules.
Where to start
Print eight modules and assemble the cluster. It’s a stable base that you can expand by joining more clusters, up to considerable size and complexity.

What you can build
A meditative desk sculpture: a lattice you assemble, reconfigure and let rest.
Larger crystalline formations, diamond-inspired lattices and reef-like growth patterns.
A modular light structure in translucent filament or with internal lighting.
An organic holder for small things like jewellery, dice, keys or tea lights, since some configurations naturally form cavities.
A hands-on model of tetrahedral geometry.
Experimental: rings
Five modules can also close into a ring, and rings can be joined into bigger compositions. It works, but this isn’t a natural structure for the geometry of the module, so treat it as an experiment. As more rings are added, tension accumulates, and fully closed spherical forms have no solution with the current modules. Elements with adjusted geometry are planned for enclosed configurations.


Print profile
Two plates:
a test plate with one module, for checking the fit
a sequential plate with five modules
Supports: not needed. Print a few pieces first to check the fit. To print more at once, arrange modules manually, and make sure the bed adhesion is strong so that one detached part doesn’t spoil the whole plate. A brim is enabled by default and can be turned off with textured plates or adhesives.
Material
Tested in PLA and PLA Matte. Tolerances may vary with printer calibration and material.
If a socket on the face that sits on the build plate feels too tight, enable elephant foot compensation(not enabled in the profile) in your slicer (0.1–0.2 mm). If the fit is still too tight or too loose, tell me in the comments and I’ll adjust.
What will you build?
Tessara doesn’t prescribe final forms: structure emerges through interaction. Upload your Makes.
If you prefer a more linear and functional construction logic, take a look at my other system, Atom.
