External filter for Centauri Carbon 2 (CC2) for official CC2 filter 115x115x20
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses filter that you already have with CC2. Relocates it for 100% exhaust filtration.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Because original placement of filter in CC2 is pure insult (it covers only half of the vent) I created this simple model. Now you can relocate it to actually properly filter 100% of the exhaust. You can use filter that was already installed in your CC2 or just buy another one from Elegoo (they are relatively cheap)
Uses four 10x3mm magnets (very tight fit) or 8x3mm with glue.
Includes 2 0.4mm gaskets, one between filter case and printer and one between filter itself and filter case. Gaskets can be printed in TPU for better seal. Also they can be used as spacers if needed.