1 / 2
Doppel-Angelruten Halterung — image 1
1 / 2

Doppel-Angelruten Halterung

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Angelruten Halterung für zwei Ruten

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
2
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Doppelter Angelruten Halter - Double Fishing Rod holder 

Schritt-für-Schritt Montage

  1. Ablängen der Schnur: Ermitteln Sie die für Ihre Angelruten benötigte Länge der 4mm Gummischnur. Schneiden Sie die Schnur auf diese individuelle Länge ab.

  2. Einfädeln: Führen Sie die abgelängte Gummischnur durch die dafür vorgesehenen Führungen am schwarzen Hauptkörper des Halters.

  3. Vorbereitung des Griffstücks: Nehmen Sie das rote Griffstück. Stecken Sie das erste Ende der Gummischnur bis zur Hälfte in die Bohrung des Griffstücks.

  4. Verkleben des ersten Endes: Geben Sie nun vorsichtig einen Tropfen Sekundenkleber direkt in die Bohrung des roten Griffstücks, dorthin, wo das erste Ende bereits steckt.

  5. Fixierung des zweiten Endes: Stecken Sie umgehend das zweite Ende der Gummischnur in dieselbe Bohrung.

  6. Aushärten lassen: Drücken Sie das Griffstück und beide darin befindlichen Schnurenden fest zusammen. Halten Sie den Druck für kurze Zeit aufrecht. Warten Sie einen Moment, bis der Kleber vollständig ausgehärtet ist, bevor Sie das Gummi auf Zug belasten.

Step-by-Step Assembly

  1. Cutting the Cord to Length: Determine the required length of the 4mm bungee cord for your fishing rods. Cut the cord to this custom length.

  2. Threading: Guide the cut bungee cord through the designated channels on the black main body of the holder.

  3. Preparing the Handle: Take the red handle piece. Insert the first end of the bungee cord halfway into the bore hole of the handle.

  4. Gluing the First End: Carefully apply a drop of superglue directly into the bore hole of the red handle where the first end is already inserted.

  5. Securing the Second End: Immediately insert the second end of the bungee cord into the same bore hole.

  6. Allowing to Cure: Firmly press the handle and both cord ends inside it together. Maintain pressure for a short moment. Wait until the glue has completely cured before putting tension on the bungee cord.

Tags