Renault Twingo 1 - Angled Center Console Switch Panel (Rally Raid / Custom)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Platine Console Centrale to be drilled, install in place of the ashtray, non destructive
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Angled Center Console Switch Panel for Renault Twingo 1 (Rally Raid & Youngtimers)
Looking for a clean, OEM-style way to mount auxiliary switches (LED light bars, manual radiator fan override, kill switch) or a 12V/USB socket in your Renault Twingo 1? This custom-designed angled dash panel slides directly into the upper slot of the center console (right next to the factory cigarette lighter)—with zero cutting or permanent modifications to your dashboard!
📐 Key Features:
Ergonomic Angled Design: Tilted toward the cabin for easy reach and clear visibility on rough tracks.
Blank Faceplate: Ready to be drilled to match your exact setup using a step drill bit (20 mm round rocker switches, 12V/USB sockets, voltmeters, etc.).
⚙ Print Settings & Material:
Mandatory Material: Print strictly in ASA or PC-Blend. Standard PLA or PETG will warp and melt behind the windshield in direct sunlight (cabin temperatures easily exceed 80 °C in summer or in the desert, whereas ASA withstands up to ~95–100 °C).
Orientation: Print face-down on a textured PEI sheet for a clean matte finish matching the OEM dashboard plastic (no supports required), or upright on its bottom edge using a wide brim and corner "mouse ears" to prevent warping.
Recommended Settings: 0.4 mm or 0.6 mm nozzle, 3–4 perimeters, 15–20% Gyroid infill, 0% part cooling fan, and a preheated enclosure.
🏜 Support Our Rally Raid & Charity Project! This part was designed and prototyped on a Prusa Core One+ by Atlas Twing Raiders for our Twing Raid build across Morocco. We spent hours of CAD work dialing in the exact fitment! While this base blank STL is free for the community.
Need a custom pre-drilled version, an embossed team logo, or a ready-to-install ASA print shipped to you? Feel free to message us on Instagram (@atr.2027) !
