1 / 6
10-Spool Top Hat for Voron 2.4 - 2020 Crossbar Remix (no metal rods) — image 1
1 / 6

10-Spool Top Hat for Voron 2.4 - 2020 Crossbar Remix (no metal rods)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Four 2020 crossbars and printed pin posts replace the 8mm rods. Reuses the original rollers with 608ZZ bearings.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
2
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Remix of the 10-Spool Top Hat for Voron 2.4 by Tyler Krick, for builds without 8 mm metal rods.

Photos of the printed build will be added later. The current images are renders of the model.

What you need

  • 4x 2020 extrusion, 470 mm (same as the frame)

  • - 20x spool roller (wrench-hole version included, or drill a 4 mm hole through your original rollers 30 mm in from each end)

  • - 40x 608ZZ bearing (2 per roller)

  • - 16x roller post, 8x roller end bracket (printed)

  • - 40x M3x8 SHCS + M3 hammer-head T-nut

  • - Crossbar end fixing, e.g. blind joints (M5 tapped ends + M5x10 BHCS) or hidden 2020 corner connectors

Print the tolerance test first

pin_tolerance_test has three pins: 1 dot = 7.7 mm, 2 dots = 7.8 mm, 3 dots = 7.9 mm. Push a 608ZZ onto each pin and pick the one that slides on by hand with the least play. 7.8 mm is the default file; the other sizes are in the variants files. Print the test and the real parts with the same slicer settings.

Assembly

  1. Press two 608ZZ bearings into each roller until flush with the end faces.

  2. 2. Fix the 4 crossbars to the bottom frame.

  3. 3. Drop M3 hammer-head T-nuts into the top slot of each crossbar. Screw the left end bracket down; leave the posts and the right end bracket loose and slid to the right.

  4. 4. Working left to right: slide a roller onto the previous pin, slide the next post left so its pin enters the other bearing, turn the roller so the wrench hole faces up, and tighten the M3 screw below through the hole with a 2.5 mm hex key (40 mm+ long leg).

  5. 5. Finish the row by sliding the right end bracket in and tightening it through the last roller.

Printing

  • Posts and brackets: base plate down, no supports. The pins come out horizontal, so the layers run along the pin.

  • - Rollers: standing up, like the original.

  • - PETG or ABS/ASA, 4+ walls, 40%+ infill recommended.

Files

  • Assembly STEP (zip) for checking fit or modifying.

  • - Optional: bottom panel split into 5 pieces to fit between the crossbars.

This remix was modelled with AI assistance (Claude) and has not been printed yet. Measured clearances in CAD: no part overlaps, roller to post 0.5 mm, post to spool 9.6 mm.

Tags