Instant Cold Soda Machine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This chills your drink down in 60 to 90 seconds which delivers the same temp as if you had it in the fridge for ~2 hours
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This is a model that can cool your soda can in literally one minute! All you have to do is put the soda can in the designated place, then put the ice in the outside compartment, close the lid, and start spinning! I made this because it was always super annoying to forget to freeze your soda and then have to wait for 2 hours just to make it taste crisp and refreshing. This model is really easy to assemble you just need superglue that's it.
Assembly Instructions
Print all the parts separately.
Then glue the can holder piece to MainGear1. There is a peg and a hole to help align them, but you have to glue them together to actually attach them.
Then attach the bottom piece to the outside piece. This just clicks into place with the rods.
Add the soda can to the can holder.
Add ice around it.
Add Layer 1, then Layer 2, then Layer 3.
Then glue the handle to the gear at the bottom that should be visible.
And start cranking!
Print Profiles
I haven't actually used a 3D printer before so I don't know for sure, but I would probably use a 0.2 mm layer height, 3–4 walls, and 25–40% infill. I would also use PETG or PLA to make sure the parts are strong and can hold everything in place without breaking.