Twisted Star Planter + Matching Saucer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
9-lobe twisted star planter with drainage and a matching drip saucer. Both fit on one plate.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Standard Digital File License
A 9-lobe star planter that twists 50° and flares 20% toward the top, with a matching saucer that follows the twist. The planter has 5 drainage holes plus underside drain channels, so water reaches the saucer even when the planter sits flat.
## Specs
- Planter: 119 × 118 × 100 mm. Fits about a 9 cm (3.5") nursery pot, or plant directly in it.
- Saucer: 114 × 113 × 15 mm, with 1.6 mm side clearance around the planter foot.
- Walls: 2.2 mm. Floor: 2.4 mm. Drain channels are 4 × 1.2 mm.
- Both parts fit on one MK4/MK3 bed together (twisted_star_planter_plate.3mf).
## Print settings
- Orientation: as exported (opening up). **No supports.** The drain channels are short bridges.
- Layer height: 0.2 mm (0.28 mm with a 0.6 mm nozzle works great)
- Perimeters: 3 (makes the walls nearly solid). Infill: 15%
- Material: PETG or ASA for outdoors, PLA indoors. Single color. Marble, terracotta and matte colors look best.
- Seam: Aligned, placed in a lobe valley.
This model was designed with AI assistance (generated with code) and rendered images are shown. Please share a Make if you print it!