Kampfe AL24 Razor Stand – Handle & Base Plates Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A compact stand for the Kämpfe AL24 safety razor. It holds the razor upright by the handle and stores two spare base…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact stand for the Kämpfe AL24 safety razor. It holds the razor upright by the handle and stores two spare base plates in dedicated slots.
Inspired by the OliWorks razor stand. This is an independent, unofficial design, not affiliated with Kämpfe or OliWorks.
Features:
- Handle socket with a snug, wobble-free fit
- Two V-arranged slots for the spare base plates, marked "+" and "+++"
- Drain holes under the handle socket and under each slot
- 60 mm diameter, 20 mm tall
Fit and tolerances (as designed / measured):
- Handle socket: 12.15 mm in the file, for a 12.00 mm handle end
- "+" slot: 4.97 x 25.53 mm in the file, for the 4.89 mm thick plate
- "+++" slot: 5.37 x 25.53 mm in the file, for the 5.29 mm thick plate
- Plates slide in and out without effort and stand firmly upright
These tolerances were calibrated on a Prusa MINI+ with PETG and a 0.4 mm nozzle. Your printer may need different clearances: the OpenSCAD source is included, and all key dimensions are parameters at the top of the file.
Print Settings
Printer Brand:
Prusa
Printer:
MINI+
Rafts:
No
Supports:
No
Resolution:
0.20 SPEED
Infill:
100%
Category: Other