1 / 3
Monitor Stand for SL88 MK2 Keyboard — image 1
1 / 3

Monitor Stand for SL88 MK2 Keyboard

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A modular monitor stand for the Studiologic SL88 MK2 keyboard that can be attached with the existing screws on the back.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
2
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution — Share Alike

Prologue

The Studiologic SL88 MK2 is a great keyboard - good build quality, keybed with impressive hammer-action, and it even comes with a free software with a bunch of good instruments. A great value product - with one minor flaw: it neither ships with note stand nor a monitor stand. Sure, you could buy that as an accessoire... for a price. But if you already spent all your hard-earned money on the keyboard? You can't even go on the street and start busking, because you got no damn stand! A tragedy!

Anyways, so I made a monitor stand. You're welcome. Just unscrew the cross-head screws in the long dent in the back, put the lower part of the holder in, and screw the screw back in. And voilá - a monitor stand for 15'' USB-C monitors! No magnets, glue or animal sacrifices required.

While I have not tested it (as I only have the SL88 MK2), I believe this stand should also work for the SL73 MK2 and the SL88 GT MK2 - as long as it's the MK2 variant, as these seem to have a different back (compared to the older versions).

This design is modular and consists of two pieces - the lower piece that needs to be screwed into the back of the keyboard, and the upper piece that gets plugged into the lower piece and acts as the actual monitor stand. So you can quickly remove the upper piece and replace them with other fitting modules (like a laptop stand or a music note stand) without having to remove the whole thing.

Print instructions

  • Printer: Bambu P1S

  • Filament: PLA Matte

  • Print profile: 0.16mm Optimal

  • Support: Yes (On Build Plate Only, Treshold Angle 25°)

  • Sparse Infill Density: 30%

Additional notes

I have three of those holders screwed into the back of my keyboard for half a year and it seems solid enough, but if you were to use a touchscreen or heavier monitors, I'd definitely recommend more sparse infill density or a more solid filament.

Tags