INDX 8 Tool Shakedown Test gcode (no filament needed)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.31 – €0.38 net (excluding VAT)
For file: INDX Tool Shakedown.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.34 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Needed a short test routine to test INDX tube routing and dock mounts.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Part of my Core One 8T INDX setup was dealing with filament mounted below the machine to reduce drag in the tubes with some filaments. In testing setups, I found some less than ideal configurations for the filament sensors, and had issues with PTFE collisions which would knock tools off the docks.
This routine was created with help from grok so I didnt need to wait for heat cycles and calibration. It picks up each tool, makes a square pattern, then a zigzag to move the head around as much as possible. It does this in order from T1-T8, and then cycles through tools at random.
No filament is needed, just drop the code either in connect or your USB drive and hit print. Watch your tubes, with the lid closed and open.