Sapphire Plus Orbiter bowden tube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed something better than the heatbreak so i went with a captured bowden tube This is only for the Orbiter V1.4 and…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed something better than the heatbreak so i went with a captured bowden tube
This is only for the Orbiter V1.4 and will allow you to print with tpu with ease
it works fine but could use a little work to make it 100%
12/14/20 Update V1.1
Worked on tube and the gear clearance reshaping the tip
2/18/21 Update
Add stl file called "guide tube" the part presses into the top threads with the small diameter down and is held in place with the bowden tube coupler it stops the filament from miss loading
in the drive gears
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100
Filament: amazon Petg Black
Category: 3D Printer Parts