1 / 6
Side Swiper (cootie) Morse key. Minimal hardware req.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple, minimal hardware, side swiper Morse code key. Otherwise known as a "cootie" key. NOTE: You will want…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 80
- Makes
- 0
- Views
- 687
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a simple, minimal hardware, side swiper Morse code key. Otherwise known as a "cootie" key.
NOTE: You will want to print the arm on a raft to prevent the leaf spring parts from warping off the bed.
This design only needs five screws, two nuts and one thin washer for assembly. Small solid copper wire will slide through the channels for a cleaner looking result. The printed PLA leaf springs work very well for returning to center. Operation is quite smooth.
Category: Electronics