Strangely symetrical vase
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I thought I'd try making a vase/flower pot in Blender. My maximum build height is only 8.5cm, but feel free to scale…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
I thought I'd try making a vase/flower pot in Blender. My maximum build height is only 8.5cm, but feel free to scale it to taste. I was playing around with shearing planes and scaling to get that triangularly faceted look. I've tried to make it symetrical, while not looking symetrical at first glance.
To print it, set your slicer to 0% fill and set number of perimeters to adjust side thickness. If you can set the bottom layer thickness, set it to at least .5mm. Since it's intent for me, is to be a flower pot, and you want drainage, my makers mark forms a hole in the bottom. If you intend to use it as a vase, you'll want to set the thickness of the bottom layer to over 1mm or you'll have a leaky vase!
Category: Art