A500 PSU Adapter Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This allows the use of a Mean Well RT-50B power supply module in the A500 PSU enclosure without modification to the enclosure. Note that the 'pocketed' side goes towards the bottom enclosure half.
The green power resistors are not necessary.
You will need some wire to extend the stock leads to the RT-50B.
! Warning !
Do all disassembly and soldering with the unit unplugged from mains voltage!
The specific Amiga power supply this works with is:
Model Number:315503-01 (Verify your PSU model before printing)
(PSM-500)
Voltage/Current:
+5vdc @ 4.3A
12vdc @ 1A
-12vdc @ 0.1A
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci 1.0 Pro 3in1
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.25mm-0.3mm
Infill:
25-35%
Notes:
I used PLA but I suppose you could use any suitable filament.
Category: Computer