Bear enlightened nose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mod can be done only on printers with IR runout sensor I made the runout sensor led mod and I found a way to…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod can be done only on printers with IR runout sensor
I made the runout sensor led mod and I found a way to watch led status.
I have been lucky because led is just under the bear logo nose.
Nose has been printend with transparent PETG.
Once the lid is printed you have to break the layer where the nose lid has to be inserted.
Led mod can be found here https://bunnyscience.dozuki.com/Guide/Bunny+and+Bear+(BNBSX)+MKS3+Geared+Extruder+Assembly/2?lang=en, read step 37
Print Settings
Printer:
Prusa MK2S DIY
Rafts:
No
Supports:
Yes
Resolution:
0.1mm/0.2mm
Infill:
20%
Filament:
Sunlu PETG
Black/Trasparent
Notes:
Lid has been printed with first layer 0.2mm and all other layers 0.1mm. This is required to have the thin breakable bridge onto the bear nose.
Category: 3D Printer Parts