1 / 3
parquet pattern bottom layer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
stl to force a custom bottom pattern in cura. add this to any cura scene you are slicing, enable these settings in…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
stl to force a custom bottom pattern in cura. add this to any cura scene you are slicing,
enable these settings in cura:
Bottom Pattern Initial Layer = Concentric
Merged Meshes Overlap = 0.01mm
Remove Mesh Intersection = True
Alternate Mesh Intersection = True
the main file is just a repeated zig zag that is 0.1mmx0.1mm cross section.
The bigger one labeled .2x.4 was a bigger cross section i made before figuring out the right settings.
Category: 2D Art