1 / 3
Proper bed leveling tool - Shim stock feeler gauge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Paper, shmaper! The BEST way to level your printer bed is to use metal shim stock as a feeler gauge. I use 0.10mm.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 32
- Makes
- 1
- Views
- 872
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Here is a quick and dirty way to keep your precious 0.1mm (or other) shim stock flat and easy to use for bed leveling.
- Cut a strip of your favorite shim stock no more than 20mm wide. (I use 0.1mm)
- Put into holder
The holder should snap together, but you can use glue or tape to keep it closed.
I put a dab of hot glue at the back of the shim to act as a nub to make retracting it easier.
Enjoy.
Custom Section
Category: 3D Printer Accessories