1 / 6
Filament Holder for Eryone Thinker - Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the filament holder for the printer Eryone Thinker Series. You can take over the original parts…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 49
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the filament holder for the printer Eryone Thinker Series. You can take over the original parts from your printer.
I remix this as I want to use some 625ZZ bearings (5x16x5mm) I had and want have the grip on both sides with some holes for style.
Please post makes, it's nice to see the makes.
Print Settings
Printer:
Eryone Thinker S
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
15
Filament:
Anycubic PLA
Blue Post-Printing =============
Assembly
- Start by but bearing on the side of the grip (spool holder base\screw) first. Then insert the existing bar from the other side. Attach the holder to the support bar attached to the print using the existing screw. I add a washer in between the bearing at the support bar to allow the bearing to turn freely. With the screw attach to the support bar, insert the bearing on the other side of the spool holder base. Now add the big washer from the existing spool holder, some soft material (I used some thin foam) and insert the screw and fix in place. The large washer and soft material is important as it is used to add tension to the one bearing to slow the spool from unraveling.
Category: 3D Printer Accessories