Eryone Thinker Z Axis Support Brace
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eryone Thinker Series - Z Brace Support Designed this to go with a 500mm 2020 V Slot Aluminum extrusion to add a Z…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Eryone Thinker Series - Z Brace Support
Designed this to go with a 500mm 2020 V Slot Aluminum extrusion to add a Z Brace to my Printer, but should work for any 400mm high printer of similar style.
These are the V-Slots I purchased: https://www.amazon.ca/gp/product/B07V1LPSSP/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Please post makes, it's nice to see the makes.
Print Settings
Printer:
Eryone Thinker S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament:
Eryone PETG
Orange
Notes:
I used custom support and placed them only to fill the holes on V Slot inserts.
V Slot Prep and parts
Designed to go the 500mm length 2020 V-Slot Extrusion bars.
There are 2 ways to attach it to the 2020 V-Slot bars- Drill 1/8/3mm holes into the 2020 with the part printed inserted (for alignment) and used 4 M3 16-20mm bolts with regular nuts to attach the part to the 2020 V-Slot
- There is a hole in the middle of the parts to allow for an M5 screw if you have a V-Slot that center is thread. I did this as my other bars had this...unfortunately, I could not find them in 500mm
I used 4 M4 8mm with lock nuts to secure it to the frame.
Category: 3D Printer Accessories