BBSHD Magnetic Brake Sensor Mount (universal)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified the original stl so that you can now just slip a zip tie through it. I found it easiest to tighten the zip…
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 77
- Makes
- 0
- Views
- 724
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
I modified the original stl so that you can now just slip a zip tie through it. I found it easiest to tighten the zip tie BEFORE sliding it onto the brake. Its easier to tighten it to fit that way. Also I hit it with a dab of hot glue afterwards to there's no chance of it falling out or slipping. Can print in any direction, since the zip tie wraps around it its strong either way. I also made little plates that the sensor could sit on since the area on my brakes had a slot down the middle. I used VHB tape on it, and it just gives something a little extra to hold onto.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
25%
Filament: Inland PLA Red
Category: Sport & Outdoors