Arduino UNO + screwshield + LCD keypad shield case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.34 – €1.64 net (excluding VAT)
For file: arduinolcdscrewshieldcasebot_015mm_pla_mk3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.49 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.52 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This case snaps together and fits Arduino UNO with the common D1 ROBOT 6 key keypad shield (no button holes, sorry but…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 67
- Makes
- 0
- Views
- 1,766
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This case snaps together and fits Arduino UNO with the common D1 ROBOT 6 key keypad shield (no button holes, sorry but my project didn't require buttons, which you can drill for) and a screwshield in between. The base can be mounted without any components so you can easily remove the top half. The screwshield used is the type that moves the top LCD shield DOWN one pin increment rather than UP one increment; if using the UP increment screwshield you will need to move the USB and power plug slots over about 1/8"
industrialtoolandmachineworks.com
Print instructions
Printed in Hatchbox PLA with factory OEM print settings on a Prusa MK3