Thermaltake Core V21 Computer Case Leveling Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My computer desk is not level, so my computer was being held level by a couple chunks of cardboard. Not the prettiest…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 43
- Makes
- 0
- Views
- 515
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
My computer desk is not level, so my computer was being held level by a couple chunks of cardboard. Not the prettiest thing in the world. I designed these so that I could level my computer on my desk.
Added bonus, I now have enough space under the computer for my keyboard cover and a small tray to hold my SD card adapters.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20-ish
Filament: Paramount PLA Black Cherry
Notes:
The Base should be oriented right-side-up, and printed with supports touching build plate.
The foot, will require a little finesse. I printed it at 100% scale in the Z axis, 95% scale in the X and Y axis and it's a good, clean, and tight thread. I didn't need to put in the set screws that I designed holes for. Depending on the tolerances and settings of your printer, you may need to scale the X and Y axes differently. Foot does not require supports if printed right-side-up.Category: Other