1 / 6
Eye of agamotto
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jewel has cutouts for inserting LEDs
- Rating
- 5 / 5
- Likes
- 278
- Downloads
- 632
- Makes
- 12
- Views
- 3,820
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Share Alike
Remixed from Laci_Legath's Eye of agamotto
Changes
- Ran the models through OpenSCAD to fit my parts.
- Added screw posts and holes.
- Designed a new back plate to fit the battery holder.
- Designed a new jewel with a pentagram pattern.
There is also a peg for a pushbutton that I ended up not using. I ran the math on the single LED and came up with ~2 weeks of battery life.
Hardware
- Hot Melt Inserts: Length 6mm, M3, OD 4.2mm
- Screws: M3 8mm
- 6V CR2032 Coin Cell Battery Holder
- 500 ohm resistor
- 3mm Green Breathing / Fading LED
Finishing
Started with a coat of sandable primer, then brushed on bronze paint. Top coat is a wash of diluted black paint.
I used glazing spot putty (bondo) on the cage cover, then sanded smooth.