Creality CR Touch mount for Voxelab Aquila
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
tl:dr Just the same as the source, but with the mounting screws moved slightly for a better fit and made the mount…
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 226
- Makes
- 4
- Views
- 1,363
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
tl:dr
Just the same as the source, but with the mounting screws moved slightly for a better fit and made the mount thicker to reduce the Z-offset. Second version has tab to hit x-axis homing switch.
Long explanation:
I liked mharrand's mount for the CR touch, but when I printed it, it wasn't flush with the bracket on which the hotend was attached to. My OCD kicked in and I moved the screw holes to make it flush.
The other issue I had (which may be the way I set up my printer) was that with the CR touch, my extruder was digging into the bed before the CR touch could sense the bed and retract. Hence I made the mount thicker to reduce the Z-offset.
Finally, since I'm also using the shortened end stop from https://www.thingiverse.com/thing:4731879, I added a tab so that the mount hits the x-axis switch a little earlier. I'm sure you can change all the offsets in the slicer, but this was easier for me.
Print Settings
Printer:
Voxelab Aquila
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
Hatchbox PLA
Black How I Designed This ===================
Category: 3D Printer Parts