Universal E3D Hemera Part Cooling Duct for 5015 Blower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Update 22.01.2020 V2.0: Here is the new version with 3-side outlets…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 131
- Makes
- 0
- Views
- 1,649
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 22.01.2020 V2.0: Here is the new version with 3-side outlets https://www.prusaprinters.org/prints/19405-universal-e3d-hemera-part-cooling-duct-v20-for-501
Update 11.12.2019(V1.1.1): : I modified (-5.0mm) the width of the exhaust to fit 3DMN's ender3 3DTouch mount. And increased the height difference of the duct by 1.1mm (before it was 1.4mm and now 2.5mm) from the tip of the nozzle
Update 10.12.2019 (V1.1 deleted - had some bugs)
BOM (Book Of Materials):
- 2x M3 nuts (for the fan)
- 3x M3x25mm screw
- 1x M3x6mm screw
- 3x M3 Washers (for the M3x25 screws - optional)
- 1x 5015 Blower fan
Instructions manual : https://www.thingiverse.com/download:7365871
If you want also want a Hemera, go check out: https://e3d-online.com/e3d-hemera
If you’ve printed this duct and like it, you can leave your feedback in the comment section or you could upload a photo in the “I made One” section, if none of the above then use the "TIP DESIGNER" button and leave a tip for a hot or cold beverage. You can also use the link: https://www.paypal.me/akoswonerth , if its easier for you. Thank you!
Print instructions
Category: 3D Printer Parts Print Settings
Printer: Geeetech A10 - Hemera
Rafts: Doesn't Matter
Supports: No
Resolution: 0.200
Infill: 25%
Filament: Geeetech PLA Green