1 / 9
Balsa Model Assembly Jig — image 1
1 / 9

Balsa Model Assembly Jig

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The larger slotted one provides a way to hold 3/32" thick balsa or plywood pieces squarely for joining. The second…

Rating
0 / 5
Likes
18
Downloads
51
Makes
0
Views
784
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

The larger slotted one provides a way to hold 3/32" thick balsa or plywood pieces squarely for joining. The second narrower slotted one is for 1/16" thick pieces. The tall ones help align curved or slanted keels.

Each slotted piece attaches to the rail with a Tee nut that's threaded M4. Threads are crap and need to be chased with a tap. Slotted pieces on top are good to go as is.

Each assembly is held together and in place by an M4 x 12mm socket head cap screw.

Each leg assembly is held in place with either M4 x 8mm set screws or socket head cap screws.

Align the slot on the bottom of the fixtures with the protruding part of the Tee nut to ensure accuracy.

Pieces attach to a 20x20mm section of 80/20; the longer the better!

Minimum distance between two parallel slots is 1" but it can be reduced to 3/4" by nipping off the ends of the Tee nuts.

No support is needed if printed as shown.

I use them for building model boats and planes to keep ribs square to the keel while glue dries.

Print Settings

Printer:

Ender 3

Rafts:

Doesn't Matter

Supports:

No

Filament:

Hatchbox PLA

Any

Category: Hobby

Tags